Geneva, Switzerland – May 12, 2009 – Having recently completed certification of their state-of-the-art, high-mach blended winglets for the Falcon 2000 large-cabin business jet, Aviation Partners Inc. (API) has appointed StandardAero as its first authorized installer for the new winglets. API has thus far seen a significant interest from Falcon 2000 operators for the new […]
Geneva, Switzerland – May 12, 2009 – StandardAero today announced that it has entered into an agreement with Cessna to support the global Citation Service Center network. The agreement involves support of the Pratt and Whitney Canada, PW615F for the Cessna Mustang and the Rolls-Royce AE3007C/C1 on the Citation X. “Today’s agreement gives Cessna Mustang […]
Geneva, Switzerland – May 12, 2009 — StandardAero has appointed Aero Management Inc as its new representative for regional airlines and business aviation in Russia and the Commonwealth of Independent States (CIS). Aero Management, led by Valentine Sushko who has held senior positions in Soviet Civil Aviation and Interstate Aviation Committee, will represent StandardAero for […]
Geneva, Switzerland – May 11, 2009 – At StandardAero, safety is an absolute and the company is continually seeking new ways to identify and prevent hazards from occurring. It has developed a safety initiative called the StandardAero Immune-SMS (Safety Management System) System, which provides a clear direction to strengthen their practices, systems and culture with […]
Geneva, Switzerland – May 11, 2009 – Citing nearly 100 years of engine maintenance, repair and overhaul (MRO) capabilities, StandardAero brings its knowledge, experience and leadership in turbine engine and auxiliary power unit (APU) MRO to this year’s European Business Aviation Convention & Exhibition (EBACE) show in Geneva, Switzerland. “With a deep depth and breadth […]
Geneva, Switzerland – May 11, 2009 – Touting enhanced tip-to-tail maintenance, repair and overhaul (MRO) capabilities, StandardAero and Associated Air Center come to this year’s European Business Aviation Convention & Exhibition (EBACE) show in Geneva, Switzerland, with an extensive menu of business aviation MRO and completion capabilities. The company will also highlight new leadership at […]
Geneva, Switzerland – May 11, 2009 – Associated Air Center (AAC) today announced that it has signed a new contract for the completion of a green Airbus Corporate Jet (ACJ). The contract, signed back on March 6, represents AAC’s 16th ACJ completion since becoming an Airbus Authorized Completion and Service Center in 2003. The aircraft […]
Tempe, Ariz. – April 15, 2009 — StandardAero has appointed Jack Lawless, President of Associated Air Center in Dallas, Texas. Lawless will manage his new duties as Associated Air Center’s President concurrent with his existing duties as StandardAero’s Chief Operating Officer. “Jack has worked closely with AAC since DAE purchased the business. His extensive experience […]
Tempe, Ariz. – April 1, 2009 – StandardAero and Banyan Air Service have signed a support center agreement, authorizing Banyan as a StandardAero-approved installation facility for the Cessna Caravan 208-series aircraft engine-upgrade program. This engine-upgrade program replaces the PT6A-114 (600 shp)/114A (675 shp) powerplants with the PT6A-135A (750 shp) powerplant. Providing an alternative to traditional […]
Tempe, Ariz. – Mar. 31, 2009 – StandardAero announced today that Chris Swan has been appointed Vice President/General Manager of its Component Services operation in Cincinnati, Ohio. In his new role, Swan will be responsible for managing the day-to-day operations of the former TSS facility. “Chris has demonstrated considerable leadership capability in his management of […]
These Standard Terms and Conditions of Sale for Services (“Terms and Conditions” or “Terms”), together with the terms of sale of the services (“Services”) as set forth in StandardAero’s catalog, quotation document, or other StandardAero communicated offer document (to be known herein as “Quote” or “Offer”) will comprise the entire agreement (“Agreement”) between the Parties for Services on Customer’s components or accessories (collectively “Components”). In this Agreement, “Customer” refers to the entity listed on StandardAero’s Quote. StandardAero and Customer may be individually referred to as a “Party” or collectively as “Parties”.
Asian Surface Technologies Pte Ltd
EB Airfoils, LLC
Jet Aviation Specialists, LLC
PAS Technologies Inc
PAS Technologies Romania SRL and
SAComponent Services (Ireland) Ltd
Accel Aviation Accessories, LLC
International Governor Services, LLC
Each Offer shall be deemed a separate contract between the Parties named therein. The Parties acknowledge and agree that any one StandardAero entity shall have no liability nor incur any obligation or be responsible for any failure of any other StandardAero entity to perform its obligations.
Paragraph (a) – Inspection/Acceptance is Reserved. Paragraph (f) – Excusable Delays is replaced with Clause 13 herein. Paragraph (h) – Patent Indemnity is modified as follows: The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings. The Contractor shall not be liable for breaches or Patent Infringement caused by the OEM. Paragraph (I) – Risk of Loss is replaced with Clause 25 herein. Paragraph (o) – Warranty is replaced with Clause 15 herein. Paragraph (p) – Limitation of Liability is replaced with Clause 18 herein. Clause 26 – Risk of Repair and Clause 19 – Waiver of Claims are to apply to any US Government Orders. In the event FAR 52.212-4 is not applicable, in any event, StandardAero shall apply the above modifications to any like terms within such contract or award.
StandardAero will Redeliver the Components to Customer ExWorks (“EXW” Incoterms 2020) at StandardAero’s facility dock. Customer is responsible for any and all shipping costs (including any import/export duties, import/ export clearance costs, tariffs, applicable taxes, and insurance) to deliver Components from StandardAero’s facility dock to Customer’s facility.
If StandardAero agrees in writing to act as IOR, at its so election and discretion, which can be withheld for any reason, StandardAero may utilize a variety of measures to import the goods. All shipping instructions must be agreed to in writing prior to the inbound shipment. Depending on the transaction, the follow instructions may apply:
To facilitate shipments, Customer shall provide a commercial invoice, or the documentation acceptable in place of a commercial invoice, with the entry and before release of the goods is authorized. The commercial invoice or other acceptable documentation shall contain: 1) an adequate description of the Component(s) including, at a minimum, the part number, serial number, and correct country of origin; 2) the quantity of Component(s) sent, 3) the value or approximate value of the Component or Accessory being sent (e.g. depreciated book value or inventory value), 4) the appropriate eight-digit subheading from the Harmonized Tariff Schedule as per the International Convention on the Harmonized Commodity Description and Coding System done at Brussels on 14 June 1983 and its amendments. Additionally, Customer shall obtain a Certificate of Origin or Certificate of Airworthiness (if applicable) from the OEM and provide it to StandardAero.
Notwithstanding any Incoterms stated herein, in the event that Customer provides a faulty shipping container and StandardAero repairs such container to return the Component, or Customer requires StandardAero to use a shipping container that has been found to not meet StandardAero’s packing specifications, Customer accepts all liability for any loss or damage in transit including for packaging of the Component.
Subject to paragraph (b) below, any Dispute that cannot be amicably settled by the Parties shall be finally settled under the Commercial Arbitration Rules of the American Arbitration Association (the “AAA Rules”), commencing with the filing of a notice of demand for arbitration by either Party following the conclusion of the thirty (30) calendar day period referenced in the paragraph above. Any arbitration will be conducted in accordance with the following: (i) if the Dispute involves a claim for damages totaling at least $5 million (combined with damages alleged in any counterclaim, cross-claim or third-party claim but not including attorneys’ fees or other costs associated with the resolution of the dispute), the Dispute is to be decided by three arbitrators appointed in accordance with the AAA Rules – all other claims are to be decided by one arbitrator appointed in accordance with the AAA Rules; (ii) the arbitrator has no authority to award punitive or other damages beyond the prevailing Party’s actual direct damages and may not, in any event, make any ruling, finding, or award that does not conform to the terms and conditions of the Agreement; (iii) the arbitration award is to be in writing and is to specify the factual and legal basis for the award; (iv) the Parties are to share all fees and expenses of the arbitration equally, with the exception that each Party bears the expense of its own counsel, experts, witnesses, and preparation and presentation of submissions; (v) the arbitration is to be conducted in Phoenix, Arizona unless all Parties agree to a different location; and (vi) the arbitration is to be final and binding and may be entered in any court of competent jurisdiction. A Party’s failure to make a timely demand for arbitration results in the forfeiture of all of the claims and issues that the Party identified in its Dispute Notice.
This Catalog Confidentiality Agreement (“Agreement”) establishes the terms of use, handling, protection, and safeguarding by Customer (“Customer” shall mean the person requesting access to the Catalog and their employer) required for access StandardAero’s prices (“Catalog”) to procure repair and overhaul services (“Services”) from StandardAero (hereinafter the “Purpose”).
