search_mobile

PW100 SMART PROGRAM

 


OVERHAUL PARTS CAP COST PROGRAM

PW118/A/B / PW119B/C / PW120/A / PW121/A / PW124B / PW125B / PW126/A


PRICE (USD)

  • Pricing basic engine overhaul (turbomachine & RGB) PW118 – $904,000
  • Pricing basic engine overhaul (turbomachine & RGB) PW118A/B – $922,000
  • Pricing basic engine overhaul (turbomachine & RGB) PW119s – $1,099,000
  • Pricing basic engine overhaul (turbomachine & RGB) PW120s – $962,000
  • Pricing basic engine overhaul (turbomachine & RGB) PW121s – $962,000
  • Pricing basic engine overhaul (turbomachine & RGB) PW124B – $1,083,000
  • Pricing basic engine overhaul (turbomachine & RGB) PW125s – $1,058,500
  • Pricing basic engine overhaul (turbomachine & RGB) PW126s – $1,058,500

INCLUDED IN THIS OFFER:

  • Category 1 – 6 Service Bulletins
  • No extra charges for foreign object damage (FOD) provided it did not cause an unscheduled removal
  • No extra charges for typical corrosion, sulphidation and non-genuine P&WC parts
  • Engine OEM shop warranty
  • Basic turbomachine ONLY overhaul parts CAP credit of $75,000

NEW LIFE-LIMITED PARTS (LLP) OPTION

Option to exchange LLP parts with new parts at additional cost when impellers have less than 10,000 cycles and discs and covers have less than 7,500 cycles, or less if sufficient to meet customer’s typical mission.

  • + $26,000 per impeller
  • + $3,500 interstage air seal
  • + $7,100 per cover
  • + $14,900 per HP, LP disc
  • + $15,300 per PT disc

BENEFITS

  • Enhanced engine reliability and durability with an increased ratio of new parts
  • Extended time on wing leading to reduced operating costs
  • Reduces uncertainty, capping the cost of overhaul parts

ELIGIBILITY REQUIREMENTS

  • Engine owners/operators must request this program immediately after detail inspection and prior to sending any parts out for repair. Some engines may be deemed beyond economical repair and incur additional charges.
  • Offer is available to PW100 engine owners/operators only.
  • The engine must have been operated in accordance with P&WC-approved documentation and authorities’ instructions for continued airworthiness and removed for scheduled reasons and not for a significant BUR.
  • Labor, accessories, shipping, packaging, bulk and non P&WC parts, test cell fees are quoted separately by your preferred P&WC designated service provider.
  • To be eligible for this program, engines with single HP vanes must be upgraded to triple vanes. The cost of triple vanes is $28,000 USD per unit.

HOT SECTION PARTS CAP COST PROGRAM

PW118/A/B / PW119B/C / PW120/A / PW121/A / PW124B /PW125B / PW126/A


PRICE (USD)

         
  Applicable Models Basic HSI Parts Capped Cost*     
PT Pack Parts Capped Cost        LLP Parts Capped Cost
 



  PW118  $429,000  $125,000  $252,000
  PW118A/B  $451,000  $124,000  $252,000
  PW119  $488,000  $133,000  $252,000
  PW120/A  $483,000  $131,000  $252,000
  PW121/A  $483,000  $131,000  $252,000
  PW123/B/C/D/E  $536,500  $133,000  $253,000
  PW124B  $496,500  $133,000  $252,000
  PW125B  $494,500  $133,000  $252,000
  PW126  $494,500  $133,000  $252,000
  PW127/B/E/F  $547,500  $144,000  $252,000
         

Upgrade to Single HP vane engines to triple vanes +US$28,000
Upgrade or Exchange – POST SB21891 nozzles for PW127+US$ 27,500

INCLUDED IN THIS OFFER:

  • Basic Hot Section gas path parts such as blades, vanes, (except for single segment HP vanes), shroud segments and gaskets/packings in hot section and if P&WC-supplied only*
  • Includes fuel nozzles (additional charge for Post SB21891 for PW127), flow divider, main oil filter, thermocouples and ignitor plugs. Other accessories excluded.
  • Category 1- 6 SBs

BENEFITS

  • Enhanced reliability and durability with an increased ratio of new parts.
  • Extended time on wing leading to reduced operating costs.
  • Reduces uncertainty by capping the cost of your P&WC HSI parts.
  • Includes Category 1 through 6 SBs.
  • No extra charges for typical corrosion, sulphidation and non-genuine P&WC parts.
  • CAP cost options life-limited parts (LLP) and power turbine disc balancing assembly parts (PT Pack).
  • CAP cost option to repair the PT Pack only
  • Older single High Pressure Vanes upgraded to triple vanes.

ELIGIBILITY REQUIREMENTS

  • This offer is only available to Owners/Operators of applicable engines.
  • Engine was operated in accordance with P&WC approved recommendations and with P&WC’s instructions for continued airworthiness. The engine has also been removed for scheduled reasons and not for a BUR/UR. (IE: overtemps, overtorques, etc.)
  • No extra charges for typical corrosion / sulphidation / non-genuine P&WC parts.
  • This program does not allow for the installation of non-genuine P&WC parts and all repairs must be completed in accordance with approved P&WC instructions for continued airworthiness


There may be additional charges. For complete details, including full terms & conditions, please contact us!

 

Locations

OVERHAUL & SERVICE CENTER LOCATIONS

Gonesse, Paris, France
1 Bd du 19 mars 1962
Gonesse Cedex France 95503
Phone: +33 (0)1 30.18.54.44

Summerside, PE, Canada
800 Aerospace Blvd., Hangar 8
Slemon Park, PE Canada C0B 2A0
Phone: +1 902.436.1333

SERVICE CENTER LOCATIONS

Brisbane, Australia
30 Industry Court
Eagle Farm, Brisbane, QLD
Australia 4009
Phone: +61.7.3268.0000

Calgary, AB, Canada
15-47 Aero Drive NE
Calgary, AB Canada T2E 8Z9
Phone: +1 403.295.4204

Nairobi, Kenya
Langata Road, Wilson Airport
Nairobi, Kenya 00100
Phone: +254.713.900.271

Johannesburg, South Africa 
Hangar 25, Lanseria Int. Airport
Lanseria, South Africa 1748
Phone: +27.11.701.3035

Seletar
Seletar Aerospace View
Singapore 797507
Phone: +65.6715.2100100

Grapevine 
600 E. Dallas Road, Suite 400
Grapevine, TX USA 76051
Phone: +1.817.416.7926