search_mobile

Business Aviation Services

Standard Terms & Conditions (Current)

 

Revision Date: August, 2026

VIEW/DOWNLOAD PDF

Unless otherwise agreed in writing, these Standard Terms and Conditions of Sale for Services (“Terms and Conditions”), together with those terms set forth in StandardAero’s Proposal or Work Order, as applicable, will comprise the entire agreement (“Agreement”) between the owner/operator of the aircraft, engines, or parts thereof, or their technical representative, chief pilot, or their director of maintenance (“Customer”) and StandardAero, each individually a “Party” or collectively the “Parties” for evaluation, maintenance, repair, modification, and overhaul services (“Services”) on Customer’s aircraft, including airframe, engines, components, or parts thereof (“Equipment”).

1. StandardAero Business Aviation Entities and Affiliates. The following Terms and Conditions shall apply to any transaction for Services performed by the StandardAero Business Aviation entities and affiliates listed below:

  • StandardAero Business Aviation Services, LLC
  • StandardAero Australia Pty. Ltd.
  • StandardAero Atlantic, Inc.
  • StandardAero Atlantic USA, Inc.
  • StandardAero France
  • Dallas Airmotive Manutenção de Motores Aeronáuticos LTDA
  • Vector Aerospace Africa (Proprietary) Ltd.
  • Vector Aerospace International Limited
  • Western Jet Aviation, Inc.

Each a StandardAero Company (“StandardAero”)

All obligations of the StandardAero entities and affiliates shall be several and not joint, and in no event shall a StandardAero Affiliate Party have any liability or obligation with respect to the acts or omissions of any other StandardAero Affiliate Party.

2. General Procedure. Customer’s shipment or delivery of their Equipment to any StandardAero facility for Services, without a prior Agreement, shall constitute Customer’s deemed acceptance of these Terms and Conditions, together with all commercial terms, e.g., price, quantities, delivery schedule and technical requirements, and shall result in a binding Agreement authorizing StandardAero to initiate Services on Customer’s Equipment. As applicable, StandardAero shall obtain and maintain all necessary certifications and authorizations from the Approved Aviation Authority (“AAA”) having jurisdiction over the StandardAero facility performing the Services.  If the Equipment is registered in a country other than the AAA overseeing the StandardAero facility performing the Services, additional certifications or approvals may be required, and Customer agrees that any associated costs, fees, or delays arising from such certification or approval shall be the responsibility of the Customer.  StandardAero will perform Services on Customer’s Equipment in accordance with the specifications listed in the Proposal. The Proposal (“Proposal”) or Work Order (“Work Order”), as applicable, identifies the pricing, rates, and commercial terms for the requested Services. When Customer is notified that the Services on Equipment are complete (“Redelivery”), StandardAero will provide Customer with copies of all work records required by the applicable AAA. StandardAero shall, during the performance of the Services, afford Customer and its Maintenance Representative (as further defined herein) access to the StandardAero facility at which the Services are being performed. Access will be granted with prior written notice during StandardAero’s regular business hours and in accordance with StandardAero’s then current safety and security policies.

3. Title. StandardAero may use new, reworked, or serviceable parts, including those from StandardAero’s rotable parts inventory to replace Customer’s repairable parts, which will be repaired by StandardAero at Customer’s expense. If such removed parts are later scrapped, condemned, or determined to be non-repairable, the parts will be disposed of and Customer will pay for the replacement part, unless otherwise covered by an applicable hourly maintenance program, less any applicable exchange fee previously paid. Title to parts and material furnished by StandardAero will pass to Customer upon incorporation into the Equipment, and simultaneously, title to the parts replaced will pass to StandardAero.

4. Exchanges. Prior to an exchange occurring, Customer shall ensure that StandardAero receives clear title to the exchange part or Equipment. If Customer fails to return the core to StandardAero within the prescribed period, Customer will pay a core charge established by StandardAero and all replacement parts that StandardAero used in the overhaul of the core that are not required as part of a normal overhaul or repair (i.e. other than 100% replacement parts). StandardAero will return all non-repairable or non-conforming cores or parts upon Customer’s written request, provided that Customer will pay any and all taxes, duties, imposts and tariffs levied on the value of the returned items and all costs of return, if any.

5. Proposal and Estimate Approval. StandardAero may provide an initial Proposal document with respect to the Services requested. Following input of the Equipment, StandardAero will provide an Estimate with respect to the workscope for the Services requested and will disclose to Customer a description of the material condition of the Equipment and the workscope required to bring that Equipment into compliance with the OEM maintenance manual and the applicable AAA, or to perform other requested Services (the “Estimate”). If StandardAero must modify the workscope, a revised Estimate will be provided to Customer. Customer will, within one (1) business day for airframe Services, or five (5) business days for engines and other Services, either (a) approve the Estimate; or (b) advise StandardAero why the Estimate cannot be approved. In the event that Customer does not approve the Estimate, StandardAero has no obligation to perform the Services and may reject, with no further liability, the applicable purchase order or repair order. If Customer fails to approve an Estimate, the Equipment will be returned to Customer. Customer will pay StandardAero’s invoice for labor hours incurred, packaging, and shipment costs. In addition, if StandardAero received a deposit without Estimate approval, the deposit shall be applied to the Services performed by StandardAero for evaluation, inspection, and any additional charges related to disposition of the Equipment.

6. Customer’s Maintenance Representative. Customer may utilize a third party (“Maintenance Representative”) to manage the maintenance of its Equipment. By signing the Agreement, Customer or the Maintenance Representative certifies to StandardAero that the Maintenance Representative assigned to engage with StandardAero has and will continue to have full authority and power from Customer to issue orders, changes, directions, and authorizations regarding the Services relating to the Equipment, including but not limited to, the authority to (a) approve the Proposal and Estimate, including the quality, approve additional workscope and related expenses; and (b) bind Customer for payment in accordance with the Terms and Conditions of this Agreement. Customer understands and agrees that the Maintenance Representative is acting on its behalf and both Customer and Maintenance Representative are bound to the Terms and Conditions of this Agreement. Customer agrees that StandardAero can enforce this Agreement directly with Customer, Maintenance Representative, or both.

If a Maintenance Representative has been engaged by Customer to maintain and manage the Equipment, by signing the Proposal and Estimate, Maintenance Representative certifies to StandardAero that they have the authorization and power to bind Customer and the Maintenance Representative regarding all decisions related to the Equipment, including but not limited to issue orders, changes, directions, and authorizations regarding the Proposal and Estimate for Services relating to the Equipment, including but not limited to, the authority to approve the Services, including the quality, approve additional workscope and related expenses, and bind Customer and Maintenance Representative for the payment of said items in accordance with the Terms and Conditions of this Agreement. The Maintenance Representative agrees and understands that it is bound by the Terms and Conditions of this Agreement and that StandardAero can enforce this Agreement directly with the Maintenance Representative, with Customer, or with both. If Customer communicates to StandardAero that Customer has cancelled or terminated Customer’s Maintenance Representative’s agency, authority, or power with respect to the Equipment, then any purchase order or other work authorization issued by Maintenance Representative shall be deemed immediately cancelled and StandardAero shall have no obligation to Customer’s Maintenance Representative. In the case when Customer is acting through a Maintenance Representative, Customer shall indemnify StandardAero from and against any claims, damages, or losses (including without limitation reasonable attorney fees) resulting to StandardAero in connection with any lack of such authority or power being exercised by the Maintenance Representative on behalf of Customer.

7. Shipping and Delivery. Shipping dates given are estimates and are not guaranteed. Equipment to be serviced shall be delivered by Customer to StandardAero Delivered Duty Paid (“DDP”) StandardAero’s facility (Incoterms 2020) that will perform the Services. Serviced Equipment shall be exported back to Customer under Delivered at Place (“DAP”) First Port of Entry (Incoterms 2020) that performed the Services. Charges for freight and transit insurance shall be at Customer’s expense. Customer shall return cores for exchange transactions DAP to StandardAero’s facility (Incoterms 2020), with charges for freight and transit insurance to the account of Customer.

When StandardAero is shipping an empty container to Customer, StandardAero will comply with export regulations from the originating facility. If StandardAero exports Equipment in a StandardAero-supplied shipping container, Customer shall return the container to StandardAero within fifteen (15) calendar days of delivery of the container. The container shall be returned to StandardAero using DAP StandardAero’s facility (Incoterms 2020) as directed by StandardAero. If the container is not returned to StandardAero within the 15-day period, Customer agrees to pay StandardAero $100 U.S. Dollars (“USD”) for each day or partial day in excess of the 15-day period. In the event the container is not returned to StandardAero within forty-five (45) days of delivery, Customer agrees to pay StandardAero the then current replacement cost of the container. This is in addition to the previously assessed daily charge. Customer shall be responsible for all repairs to damaged containers.

StandardAero shall export StandardAero-owned tooling to Customer under DAP, Customer’s facility (Incoterms 2020). Customer shall export the tooling back to StandardAero using Free Carrier (“FCA”) StandardAero’s facility (Incoterms 2020) as directed by StandardAero. Customer shall be responsible for all damage to or loss of tooling or tooling boxes during use or return shipment to StandardAero.

8. Export/Import Governmental Regulations and Anti-Boycott Provisions. 

For United States Exports and Imports, Customer will be the Exporter of Record (“EOR”) and the Importer of Record (“IOR”) of the Equipment unless StandardAero otherwise agrees in writing. As EOR and IOR, Customer will be responsible for complying with the applicable country’s export and import laws and regulations, and for obtaining all U.S. necessary export and import licenses and permits (including re-exports and transfers in country outside the U.S.), and for obtaining licenses and other authorizations for the export and release of Technical Data as defined in the U.S. Code of Federal Regulations (“CFR”) 22CFR 120.10 required by the U.S. International Traffic in Arms Regulations (“ITAR”), for the export and release of Technology as defined in 15CFR Part 772 required by the U.S. Export Administration Regulations (“EAR”), and for obtaining any other requirement by the U.S. Foreign Trade Regulations (“FTR”), the U.S. Office of Foreign Asset Controls (“OFAC”), and the U.S. Customs and Border Protection (“CBP”). For Routed Export Transactions (“RET”), in which a Foreign Principal Party in Interest (“FPPI”) Customer has the primary foreign financial interest in the export transaction, Customer authorizes StandardAero to file the Electronic Export Information (“EEI”) on their behalf. For ocean imports into the U.S, Importer Security Filing (“ISF”) is required to be filed no later than twenty-four (24) hours before the cargo is laden aboard a vessel at the foreign port of exit destined to the U.S.; therefore, Customer must provide all ISF filing data elements “Form 10+2” to StandardAero at least seventy-two (72) hours prior to cargo loading on the vessel at the foreign port of exit. Failure to provide accurate, complete or on time ISF data elements may result in fines up to $5,000 USD per occurrence. CBP may also withhold release of cargo where an ISF was not filed. If the ISF information is not supplied in the time requested, all expenses incurred as a result will be at Customer’s expense, including but not limited to any fines, delays, Storage, or demurrage costs. Customer will not dispose of USA-origin items furnished by StandardAero (including technical data) other than in and to the country of ultimate destination specified in the Proposal, government license(s), and authorization(s), except as law and regulation permit.

For non-U.S. StandardAero subsidiaries, to include Brazil and United Kingdom, exports and imports, Customer will be the Exporter and the Importer (or entity designated by each country to comply with their applicable export and import requirements, laws and regulations) of the Equipment, unless StandardAero otherwise agrees in writing. As Exporter and Importer, Customer will be responsible for complying with applicable countries’ export and import laws and regulations and comparable U.S. export, re-export, release and import control regulations, and for obtaining all necessary export and import licenses and permits (including transfers in country.), and for obtaining licenses and other authorizations for the export and release of Technical Data or equivalent as defined by each country. For Brazil, the Export Regulations and Governing Authorities are: (a) The Brazilian Electricity Regulatory Agency, (b) The National Petroleum Agency, (c) The National Sanitary Surveillance Agency, (d) The National Nuclear Energy Commission, (e) The Army command, (f) The SECEX’s Subsecretariat of Operations for Foreign Trade, (g) The National Department of Mineral Production, (h) The Federal Police, (i) The Brazilian Institute of Environment and Renewable Natural Resources, (j) The Ministry of Science and Technology, and (k) The Ministry of Defense. For United Kingdom, the Export Control Joint Unit (“ECJU”) administers the United Kingdom’s (“U.K.’s”) system of export controls and licensing for military and dual-use items.

All Redelivered items (including technical data) shall at all times be subject to U.S. Export Regulations, International Traffic in Arms Regulations of the U.S., and applicable U.S. Customs Regulations and applicable United Kingdom and European Union Export Control Regulations.

Anti-Boycott Provisions. Customer will not request of StandardAero information or documentation where the purpose of such request is to support, give effect to or comply with a boycott of any country in contravention of the laws or policies of the United States, including but not limited to the Arab League boycott of Israel. StandardAero hereby rejects any such request by Customer and will report receipt of any such request to the relevant U.S. government office, as required by law.

9. Prices/Payment. Unless otherwise stated in the Proposal or Estimate, StandardAero’s prices do not include shipping, insurance, taxes, or other similar charges.  If the repairs listed in StandardAero’s Proposal or Customer’s work request are to be covered by an applicable hourly maintenance program, StandardAero’s Proposal or Work Order identifying the Services to be performed shall so indicate. If Customer elects to undertake any work that is not covered by an applicable hourly maintenance program, StandardAero’s prices for Services will be stated in the Proposal in U.S. Dollars. For such additional charges, a charge equal to 5% of the billed labor charges will be added to the final invoice to cover the cost of miscellaneous shop supplies and hazardous material disposal. This charge will apply to all airframe and engine Work Orders, not to exceed $5,000 USD. Unless otherwise stated, this additional fee is not applicable to avionics, interior, and paint Work Orders. Any Services and other applicable charges that are not priced in the Proposal or are not otherwise agreed upon, and not covered by an applicable hourly maintenance program, shall be invoiced to Customer at StandardAero’s then current rates to include other applicable charges, in addition to those identified in Section 10. Taxes. Unless otherwise stated in the Proposal, all invoices are due upon Redelivery of the Equipment and shall be paid by wire transfer as stated on StandardAero’s invoice, immediately available for use and without set-off. If Customer’s account becomes delinquent, Customer will grant StandardAero commercially acceptable assurances of payment.

Without prejudice to its other rights and remedies under this Agreement, if Customer fails to pay within the stated terms, StandardAero may, at its sole discretion, consider Customer in material breach of the Agreement. Customer shall pay all, upon the issuance of an invoice by StandardAero, reasonable Storage, preservation, attorneys’ fees, expenses, and costs incurred by StandardAero in attempting recovery of any sum owed to it by Customer. The additional fees will begin to accrue if Customer has failed to pay any amounts owed within ten (10) days following notice to Customer to cure the delinquency in payment. Customer’s failure to pay within the stated terms, may, at StandardAero’s sole discretion, relieve StandardAero of any further performance obligations hereunder, including without limitation, any warranty obligations. If Customer has a good faith dispute of any invoice, in whole or in part, such good faith dispute will not relieve Customer’s obligation to pay undisputed invoices and payment obligations in a timely fashion within the payment terms. All pricing and payment disputes or payment discrepancies must be identified by Customer within ten (10) days of invoice. All sums past due bear interest at the maximum rate permitted by law. The interest will accrue from the 15th day after the payment was due. The interest payment will be due and payable on the first day of each month after interest begins to accrue, until full payment of the amount due is made.

Credit terms may be granted upon completion of a satisfactory credit check. If Customer’s account becomes delinquent, Customer will grant StandardAero commercially acceptable assurances of payment. StandardAero reserves the right to withdraw or make modifications to credit terms at its sole discretion.

Additionally, for Services not covered by an applicable maintenance service plan, StandardAero shall have a lien on all Equipment in its possession for all sums owed or owing to StandardAero. If said sums have not been paid by Customer within ninety (90) days of the date on which the sum was due, StandardAero shall have the right to file for foreclosure on the Equipment and to sell said property to satisfy the sum due, in addition to any other rights it may have at law or under the Agreement. If a lien may not be placed on Customer’s property, StandardAero shall retain possession of Customer’s asset(s) until such sums are paid. Customer shall indemnify and hold harmless StandardAero as to any claims, suits, and all associated costs in the event a third party claims an interest in the property sold.

10. Taxes. Other than income taxes StandardAero owes on monies earned, Customer agrees to pay all taxes including sales, use, excise, valued-added, services, consumption, or other taxes, (collectively “Taxes”), duties, tariffs, fees, charges, or assessments of any nature that are assessed or levied in connection with the Services, unless otherwise covered by an applicable hourly maintenance program. Any applicable duties and/or tariffs shall be invoiced back to the Customer. The Customer shall pay such invoice in accordance with Section 9. Prices/Payment,  as stated herein. Taxes and tax exemptions on parts and Services may vary by U.S. state law for the location at which the Services are performed. All prices are quoted excluding Taxes. Customer shall indemnify and hold StandardAero harmless from the payment or imposition of any tax or levy imposed on any articles sold, plus penalties, interest and reasonable attorney’s fees connected with the imposition of any such tax or levy.

11. Excusable Delay / Force Majeure. Customer will excuse StandardAero from, and StandardAero will not be liable for, any delay in StandardAero’s performance due to causes beyond StandardAero’s reasonable control, including but not limited to: (a) war, warlike operations, armed aggression, terrorism, insurrection, riots, or sabotage; (b) fires, floods, explosions, earthquakes, serious accidents, inclement weather; (c) any acts of a government, governmental priorities, allocation regulations, or orders; (d) acts of God or of the public enemy; (e) failure of or delays in transportation; (f) epidemics, pandemics, quarantine restrictions, or other similar circumstances; (g) inability to procure materials or parts, including unavailability of OEM parts, suppliers, and subcontractors to furnish parts, labor or materials within normal delivery times; (h) labor troubles causing cessation, slowdown, work stoppage or interruption of work; and (i) delays of any type that are caused by Customer. In the event of such delay, StandardAero may invoice Customer for all completed Services. If Customer causes a delay, including but not limited to a delay in providing Equipment maintenance records, wiring diagrams, data or other information required by StandardAero prior to beginning any such Services, StandardAero may stop Services on Customer’s Equipment, which may result in a greater day-for-day delay in the completion of Services, and the Equipment may be placed in Storage in accordance with Sections 23 – Receipt of Parts / Risk of Loss / Redelivery and 24 – Storage / Abandonment.

12. Work Stoppage. If Customer causes any postponement or stoppage of Services, including Customer’s delay of engine removal, reinstallation, and/or repairs by StandardAero’s Mobile Service Team (“Work Stoppage”), Customer will be liable to StandardAero for any postponement costs associated with the Work Stoppage, including but not limited to, reasonable Storage fees, handling, inspections, preservation, travel, freight, and labor costs. Customer agrees that such postponement charges will be invoiced monthly and invoices are due and payable when received by Customer. Customer further understands that the Services will not be resumed until such invoices are paid in full. Upon lifting of the Work Stoppage, StandardAero will assess the impact to the Redelivery schedule and provide Customer with a new Redelivery date.

13. Service Warranty.
Unless otherwise stated in the Proposal or Estimate, StandardAero warrants that for a period of one (1) year after the date of Redelivery, the Services performed by StandardAero will be free from defects in workmanship (the “Warranty”). A defect shall mean the failure of the Equipment to function in accordance with the OEM or applicable AAA’s requirements due to StandardAero’s workmanship.

If the Services performed do not meet this Warranty, StandardAero will promptly, at StandardAero’s option, either (a) re-perform the Services at a location StandardAero specifies, or (b) in instances where StandardAero has agreed in advance and in writing to arrange re-performance by a third party, or refund the repair price allocable to the re-performed Services. The Warranty period on any such re-performed Services will be the unexpired portion of the original Warranty. StandardAero will pass through to Customer any available manufacturers’ parts warranties and will use commercially reasonable efforts to assist Customer with administration of such warranty claims. StandardAero will reimburse Customer for reasonable freight charges Customer incurs for return of the Equipment to the designated StandardAero facility for valid Warranty repairs. StandardAero will not reimburse costs of movement of Customer’s aircraft. This Warranty is exclusive and in lieu of all other warranties, including warranties of merchantability and fitness for a particular purpose. Except for StandardAero’s gross negligence or willful misconduct, StandardAero will not be responsible for incidental, resultant, or consequential damages. All other obligations and liabilities with respect to the repair or replacement of defects due to StandardAero’s workmanship are hereby expressly disclaimed. This Warranty does not include, and StandardAero will not be liable for any other remedy or liability for diminution in value, incidental, or consequential damages of any kind, including but not limited to such damages resulting from a breach of contract or Warranty, alleged negligence or otherwise, damage to airframe or other property, costs or expense of operation of the Quick Engine Change Unit (“QECU”), accessory, or part or other Equipment, loss of use of the aircraft, lost profits or revenue, cost of capital, cost of substitute Equipment, facilities or Services, downtime costs, collection costs, attorney’s fees, damages of any type, or claims of Customer’s buyers or other third parties for such damages, or any other loss, claim or demand of any description.

WARRANTY LIMITATIONS AND EXCLUSIONS
The obligation of StandardAero under this Warranty is limited to the repair or replacement of the parts which failed due to defects in StandardAero’s workmanship. In the event that life limited parts covered by this Warranty are damaged beyond repair, StandardAero shall only be obligated for the value of the remaining life of such parts.

CONDITIONS FOR WARRANTY COVERAGE
This Warranty is not assignable without StandardAero’s prior written consent and is applicable only if, following Redelivery, the Equipment: (a) has been transported, stored, installed, operated, handled, maintained, and repaired in accordance with Airworthiness Directives and the then-current recommendations of the Equipment manufacturer as stated in its manuals, Service Bulletins, or written instructions; (b) has not been altered, modified or repaired by anyone other than StandardAero; and (c) has not been subjected to accident, misuse, abuse, or neglect.

Warranty coverage may be denied if the engine, accessory, module, or part: (a) has not been maintained and operated in accordance with StandardAero’s recommendations and the OEM’s directives and instructions; (b) has been altered or repaired outside StandardAero facilities; (c) has been subjected to misuse, neglect, accident, improper handling or Storage, or damage from the elements. Warranty coverage may be suspended or invalidated, at StandardAero’s sole discretion, if Customer is not in complete compliance and current with all payment and other contractual obligations stated in the Agreement.

New parts embodied by StandardAero during an overhaul or repair shall be subject to the OEM’s new part warranty. StandardAero will assist Customer by administering new parts warranty claims with the OEM on behalf of Customer in accordance with OEM warranty policies. StandardAero does not warrant nor does it have liability for new parts, Parts Manufacturer Approval (“PMA”) parts, Customer supplied parts, nor parts embodied by or workmanship of other companies, except for workmanship performed at StandardAero’s direction. StandardAero does not warrant, nor does it have liability for, failures caused by or related to parts embodied or Services performed by any other company or individual. StandardAero may assist Customer by requesting that StandardAero’s suppliers’ and subcontractors’ warranties, with respect to parts embodied in or Services provided on Customer’s engines, accessories, modules, or parts shall be extended to and be enforceable by Customer.

WARRANTY CLAIMS
To obtain Warranty coverage, Customer must discover defects in StandardAero’s workmanship within the Warranty period. Customer must give StandardAero written notice no later than three (3) business days after Customer knew or should have known of the defect and such written notice, within the number of days specified, does not extend the Warranty period. The Equipment must be returned, shipping prepaid by Customer, to StandardAero no later than thirty (30) days after such notification is made. Customer must make any previously attached or related parts available to StandardAero upon request to assist in determining the cause of the defect. Warranty claims on Equipment that have been allowed, shall be returned to Customer at StandardAero’s expense. If a Warranty claim is denied, the Equipment shall be returned to Customer Cash on Delivery (“C.O.D.”) and the cost of disassembly and reassembly to disclose the claimed defect and the cost of preparation of any technical report shall be borne by Customer at StandardAero’s current applicable hourly rates.

The provisions of this Section 13 may be supplemented or superseded by separate warranty terms as agreed in writing by StandardAero.

14. Rental Assets (If applicable). Customer may be entitled to receive an engine, APU, or component (“Rental Asset”) when the Equipment is being serviced, subject to the execution of a Lease or Bailment Agreement (“Lease Agreement”), the terms of which shall control that transaction. StandardAero does not guarantee availability of Rental Assets for all transactions.

15. StandardAero Indemnity. StandardAero will indemnify Customer from third party claims for damage to, or destruction, or loss of any property, or any injury to or death of any person caused solely by StandardAero’s willful misconduct or grossly negligent performance of the Services and for which, as a condition of such indemnification, Customer has promptly given written notice of such claim; provided however, StandardAero shall not be required to indemnify Customer for any claims arising from Customer’s negligence or misconduct. The indemnification provided hereunder shall be Customer’s sole and exclusive remedy for such third party claims. StandardAero shall indemnify Customer from and against all claims resulting in injuries or damages suffered by employees of StandardAero to the extent they arise from performance of the Services hereunder. The indemnity provided herein shall expire at such time the Equipment is serviced by any other service provider. StandardAero shall not be responsible for any loss or damage resulting from unit value, depreciation, or as a result of acts of Customer where such failure is due to causes beyond the control and without the fault or negligence of StandardAero. Nothing in this Agreement will affect StandardAero’s liability under the United Kingdom’s Unfair Contract Terms Act 1977 for death or personal injury caused by StandardAero’s negligence.

16. Customer Indemnity. Customer will indemnify StandardAero, its subsidiaries, employees, agents, officers and directors from and against all suits, actions, legal or administrative proceedings, damages, costs, expenses and liabilities, including but not limited to attorney’s fees and court costs, asserted against or incurred by StandardAero and which arise out of, directly or indirectly relate to, or are in any way incident to third party claims for damage to or destruction of any property, including the Equipment, or any injury to or death of any person caused by Customer’s use, operation, repair, maintenance, or disposition of the Equipment and any claims related to use of Customer Furnished Property utilized by StandardAero in the provisioning of Services, or related to any negligent act or omission or breach of any other representation made by Customer under this Agreement, provided, however, Customer shall not be required to indemnify StandardAero for any claims caused solely by StandardAero’s gross negligence or willful misconduct in its performance of the Services. Customer shall indemnify StandardAero from and against all claims resulting in injuries or damages suffered by employees of Customer and Customer’s Maintenance Representative in connection with such actions or inactions in fulfilling the obligations under this Agreement while on the premises of StandardAero.

17. Limitation of Liability. The total liability of StandardAero shall not exceed the dollar value of the amounts paid by Customer for the Services provided under the Work Order giving rise to such claim. Neither Party shall be liable for exemplary, indirect, special, incidental, punitive or consequential damages including, without limitation, loss of use, lost profits, revenue, or diminution of value whether as a result of breach of contract, warranty and any other claims at law or in equity including claims for fraud or tort regardless of how characterized and even if such Party has been advised of the possibility of such damages under or in connection with this Agreement. This limitation of liability shall not apply to instances of gross negligence or willful misconduct by StandardAero or to the indemnity obligations stipulated in this Agreement. This limitation of liability applies to the extent permitted by the applicable law and regardless of whether any liability arises from breach of contract, warranty, tort, by operation of law, or otherwise. Customer hereby waives, and releases StandardAero from, any and all claims for any amount in excess of the amount specified in this Section.

18. Customer Insurance. If StandardAero is providing Services on Customer’s Equipment, Customer shall, at its expense, procure, maintain and keep in full force and effect “all risks” Hull Physical Damage and Spares insurance, including War and Allied Perils, to protect the value of the Equipment and/or Rental Asset. Additionally, Customer shall, at its expense, for the same duration, procure, maintain and keep in full force and effect an aviation general liability and aircraft liability policy with minimum limits of $200,000,000 USD per occurrence, and will name StandardAero as an additional insured. All Customer policies will be endorsed to waive any and all rights of subrogation against StandardAero and include a breach of warranty clause in favor of StandardAero. Before Services commence, Customer will provide StandardAero with Certificates of Insurance evidencing the above insurance coverages and providing that the insurance may not be cancelled without thirty (30) days prior written notice to StandardAero. Customer acknowledges that StandardAero is not liable for loss of Customer’s aircraft or other damage to property, personal injury or death of any person, while the aircraft is in flight unless such occurrence is solely caused by a product or component improperly repaired by StandardAero under the terms of this Agreement. For purposes of this Section, the term “in flight” is defined as the time period commencing when the aircraft moves forward in taking off or attempting to take-off for air transit, while in the air and until the aircraft comes to rest after landing or, the landing run having been safely completed, and power is applied for taxiing. Furthermore, StandardAero shall not be liable for damage to the aircraft and/or Equipment while in the care, custody or control of StandardAero if such damage was a result of an Act of God or reasons beyond the control of StandardAero unless such damage is due to the negligence or misconduct of StandardAero.

19. StandardAero Insurance. StandardAero, at its expense, will maintain until Redelivery of the Equipment the following insurance coverage: Aviation Products Liability including Aviation Premises, Products and Completed Operations and Hangarkeepers Liability for a Combined Single Limit Bodily Injury and Property Damage in the amount of $200,000,000 USD each occurrence (and annual aggregate limit in respect of products liability).

20. Confidentiality. The Parties shall treat as confidential all provisions of this Agreement and any information disclosed by one Party to the other in furtherance of this Agreement, with the exception that the receiving Party may share information with its employees or designated Maintenance Representatives on a strictly need-to-know basis. (a) During the term of this Agreement, StandardAero and Customer may provide to each other information or data that either Party considers private, proprietary, competition-sensitive, or confidential in order to satisfy the requirements of this Agreement. “Proprietary Information”, as used herein, shall mean any and all information, written, oral, electronically transmitted, graphic or in other form, that is provided and exchanged for consideration of current or future business opportunities, whether or not stamped or otherwise designated as confidential, and whether or not proprietary, conceptual or reduced to specific practices, such information may include, but is not limited to, pricing, workscope, warranty, products, processes, and the Terms and Conditions of this Agreement. (b) The Parties shall protect the Proprietary Information received under this Agreement with the same degree of care as each Party takes to preserve and safeguard its own proprietary information, and such degree of care is reasonably calculated to prevent such inadvertent disclosure. Use of Proprietary Information by StandardAero or Customer shall be limited to the purposes contemplated by this Agreement or any Agreement referencing this Agreement and any amendments thereto. StandardAero and Customer further agree not to use the Proprietary Information for its own benefit or the benefit of another. (c) The Parties agree that, in the event StandardAero or Customer uses the Proprietary Information contrary to the terms of this Section, the affected Party, in addition to any and all other remedies available to it, shall have the right to equitable relief, restraining or enjoining the causing Party from using any Proprietary Information of the affected Party in violation of the Terms and Conditions of this Section and to recover from the causing Party reasonable costs in enforcing this Section, including reasonable attorneys’ fees. (d) Neither the execution and delivery of this Agreement nor the delivery of any Proprietary Information hereunder shall be construed as granting either expressly or by implication, estoppel, or otherwise, any rights in or license to the Confidential or Proprietary Information not explicitly set forth herein. (e) Proprietary Information may be disclosed upon the written consent of the owner thereof, or pursuant to valid legal orders or governmental regulations or in connection with an action or proceeding brought to enforce or interpret this Agreement. (f) StandardAero may provide information about the Equipment and the Services performed to the AAA(s) and/or to the OEM responsible for the Equipment to the extent required by the applicable AAA(s) or by StandardAero’s OEM authorization(s). (g) The provisions of this Section shall survive termination or expiration of this Agreement.

21. Intellectual Property. This Agreement does not give either Party the right to use the trademarks, patents, or other intellectual property of the other Party, or grant any rights to any intellectual property owned or licensed by a Party, or that which is first reduced to practice in performance of the Services.

22. Termination. StandardAero may terminate the Services for its convenience with thirty (30) days’ prior written notice.  Either Party may terminate this Agreement upon thirty (30) days written notice for breach of any material provision unless such breach is cured within the thirty (30) days. StandardAero may terminate this Agreement immediately if Customer (a) fails to make any of the required payments when due, (b) makes any agreement with Customer’s creditors due to Customer’s inability to make timely payment of Customer’s debts, (c) enters into compulsory or voluntary liquidation, (d) becomes insolvent, or (e) becomes subject to the appointment of a receiver of all or a material part of Customer’s assets. Upon any such termination, Customer will not be relieved of Customer’s obligation to pay for Services performed and Customer’s Equipment may be placed into Storage and subject to the terms of Section 24 – Storage / Abandonment.

23. Receipt of Parts / Risk of Loss / Redelivery. 
Receipt of Parts. StandardAero’s signature or electronic confirmation of a shipment delivery is not confirmation of the Equipment received. Notwithstanding the Incoterms, if Customer issues multiple purchase orders along with the Equipment, or ships a batch shipment of Equipment that is not to be inducted by StandardAero for immediate processing due to scheduling capacities, the Storage (as further defined herein) and risk of loss remains with Customer until the Equipment is properly received and inducted into work in progress (“WIP”) and may be subject to Storage fees. Receipt by StandardAero is confirmed solely when actual items listed in the shipment documents have been visually and physically verified as received within StandardAero’s facility. StandardAero will not be liable for discrepancies between the shipping documents and the Equipment received. If available, videography will be used to substantiate any such discrepancy.

Risk of Loss. Notwithstanding any other provision in the exchange of documents between the Parties and irrespective of the Incoterms, the risk of loss for Customer’s Equipment while in the care, custody, and control of StandardAero is limited to the loss or damage to Customer’s Equipment resulting from StandardAero’s negligence.  In no event shall StandardAero be liable for any loss or damage resulting from Acts of God, perils or reasons beyond the control of StandardAero.

Redelivery. If Customer’s Equipment cannot be Redelivered when ready due to Customer’s: (a) act or failure to act, including but not limited to, the failure to make payment, (b) refusal to accept Redelivery, or (c) request that Redelivery not be made when otherwise ready, Customer shall also bear the risk of loss upon the placement of the Equipment in Storage (whether stored in StandardAero’s facility, parked or moved to any other Storage location). In such event, all reasonable expenses StandardAero incurs for activities such as, but not limited to, preparation for placement into Storage, handling, reasonable Storage fees, inspection and preservation will be due and payable on receipt of StandardAero’s invoice. Customer will be liable for all insurance costs and will indemnify StandardAero for all costs associated with such Storage or parking, including delay, from Customer’s failure to vacate an available slot in StandardAero’s facilities.

24. Storage / Abandonment. Any Storage fees provided for in these terms are charged at $500 USD per day. Any Equipment left in StandardAero’s possession (a) for more than sixty (60) calendar days without Customer’s approval for StandardAero to commence repair Services, or (b) for more than ninety (90) calendar days following a Work Stoppage or cancellation of an order, or (c) for more than sixty (60) calendar days following completion of Work, shall thereafter be deemed abandoned absent some alternative agreement in writing signed by StandardAero. StandardAero reserves the right to elect to continue to store the Equipment (“Storage”) at Customer’s cost or to recover unpaid balances, Storage costs, and/or repair costs by any means necessary, including sale of the Equipment to a third party in accordance with applicable law. Customer shall indemnify and hold harmless StandardAero against any claims or losses arising from any sale of Customer’s abandoned property.

25. Dispute Resolution and Governing Law.

  • (a) Governing Law. This Agreement shall be governed by the laws of the State of New York, (excluding its conflict of law provisions, the UN Convention on Contracts for the International Sale of Goods, and any laws which govern the validity, perfection, or creation of any lien or security interest hereunder, and the exercise of rights or remedies with respect of such lien or security interest for a particular item which will be governed by the laws of the applicable jurisdiction pertaining to liens).
  • (b) Management Dispute Process. If any dispute, controversy or claim that arises out of or in connection with this Agreement (“Dispute”), the Parties shall first attempt, in good faith, to resolve the Dispute through negotiation between their designated senior management representatives for a period of thirty (30) calendar days from the date of notice of the Dispute sent by one Party to the other Party (“Dispute Notice”). The Party sending the Dispute Notice shall, in such notice: (i) set forth the specifics of the Dispute in detail; and (ii) designate its senior management representative. The other Party shall, within five (5) business days after receiving the initial Dispute Notice and by written notice to the initiating Party, designate its senior management representative and add any other issues or claims for resolution not identified in the Dispute Notice.
  • (c) Mediation. Subsequent to the filing of any demand for arbitration but prior to: (i) the selection of the arbitrator(s); and (ii) the commencement of discovery, the Parties must participate, in good faith, in a confidential mediation with a third party neutral mediator selected in accordance with the AAA Rules (“Mediation”). The Parties shall share all fees and expenses of the Mediation equally, with the exception that each Party bears the expense of its own counsel and preparation and presentation of submissions. The Mediation is to be conducted in Phoenix, Arizona USA unless all Parties agree to a different location. All objections to jurisdiction and venue in Phoenix, Arizona USA are hereby waived with respect to both the location of Arbitration (as defined in Paragraph (d) below) and Mediation. The Parties’ participation in the Mediation is without prejudice to any positions taken or evidence introduced during any subsequent Arbitration proceeding.
  • (d) Arbitration. Any Dispute that cannot be amicably settled by the Parties shall be finally resolved by Arbitration under the Commercial Arbitration Rules of the American Arbitration Association (“AAA Rules”)(“Arbitration”), commencing with the filing of a notice of demand for Arbitration by either Party following the conclusion of the thirty (30) calendar day period referenced in Paragraph (a) above. The claiming Party waives any such claim, along with its right to invoke the Arbitration process, if such notice is filed more than thirty (30) days beyond conclusion of Mediation. Any Arbitration will be conducted in accordance with the following: (i) if the Dispute involves a claim for damages totaling at least $1,000,000 USD (combined with damages alleged in any counterclaim, cross-claim or third party claim but not including attorneys’ fees or other costs associated with the resolution of the Dispute), the Dispute is to be decided by three (3) arbitrators appointed in accordance with the AAA Rules; (ii) the arbitrator has no authority to award punitive or other damages beyond the prevailing Party’s actual direct damages and may not, in any event, make any ruling, finding, or award that does not conform to the Terms and Conditions of the Agreement; (iii) the Arbitration award is to be in writing and is to specify the factual and legal basis for the award; (iv) the Parties are to share all fees and expenses of the Arbitration equally, with the exception that each Party bears the expense of its own counsel, experts, witnesses, and preparation and presentation of submissions; (v) the arbitration is to be conducted in Phoenix, Arizona USA unless all Parties agree, in writing, to a different location; and (vi) the Arbitration is to be final and binding and may be entered in any court of competent jurisdiction.
  • (e) Procedure for Arbitration. Following the close of Mediation, if not successful, the Parties may engage in the discovery in accordance with the following: (i) each Party may take three (3) non-expert depositions, each deposition limited to seven (7) hours; (ii) each Party may serve up to fifteen (15) requests for production of documents (including subparts); (iii) each Party may serve up to fifteen (15) interrogatories (including subparts); (iv) each Party may depose the other Party’s expert witnesses following the production of the expert’s written report, each such expert deposition limited to seven (7) hours; and (v) any additional discovery will be allowed only upon the written agreement of the Parties or upon an order entered by the Arbitrator(s). All procedural matters in connection with any Arbitration shall be governed by the Federal Rules of Civil Procedure unless the Parties agree otherwise in writing
  • (f) Other Remedies.  Notwithstanding any of Paragraphs (a) – (e) above, either Party may, at any time: (i) seek from a court of competent jurisdiction, any equitable, interim or provisional relief if necessary to avoid irreparable injury; (ii) have recourse to any applicable lien rights and lien remedies, and pursue in any court of competent jurisdiction any lien enforcement procedures and/or any proceeding for replevin or repossession of property, without limiting this Subparagraph (ii), any applicable lien notice or filing deadlines will continue to apply to the Parties; and (iii) make and/or commence any demand, claim, suit or any other action, including in any court of competent jurisdiction, with respect to the collection of any overdue payment owing by the other Party. For any of the actions listed herein in Paragraph (f), the prevailing Party shall be entitled to recover any reasonable legal fees and expenses incurred herewith.
  • (g) Dispute Confidentiality.  The existence and content of any Dispute, all Dispute resolution proceedings, and all statements made and documents provided or exchanged in connection with this Dispute resolution process are confidential to the Parties and may not be disclosed by either Party to any third parties (other than outside counsel), except with the prior written consent of the other Party or pursuant to legal process.

26. Subcontracting. StandardAero has the right to subcontract any Services to any subcontractor that is properly certified by the AAA and an approved StandardAero vendor. StandardAero will pass through to Customer all available warranties and use commercially reasonable efforts to assist Customer in administering any warranty claim.

27. Controlling Terms. Any additional or different terms and conditions contained in Customer’s order document that are not negotiated by the Parties are explicitly rejected by StandardAero without further notice of rejection and shall be of no effect nor under any circumstances binding upon StandardAero.

28. Assignment. This Agreement may not be assigned without the prior written consent of the other Party, except that Customer’s consent will not be required for an assignment by StandardAero to one of StandardAero’s affiliates.

29. Waiver of Immunity. If Customer is incorporated or based outside of the country where the Services are performed, to the extent that Customer or any of Customer’s property becomes entitled to sovereign or other immunity from any legal action, Customer waives Customer’s immunity in connection with this Agreement.

30. Non-Waiver of Rights and Remedies. Failure or delay in the exercise of any right or remedy under this Agreement will not waive or impair such right or remedy. No waiver given will require future or further waivers, including waiver of any breach. No waiver of any provision of this agreement is effective unless in writing and signed by both Parties.

31. Language, Notices. All notices, correspondence, and documentation connected with this Agreement will be in English, given in writing, effective upon receipt, and provided to the addresses set forth in this Agreement, which may be changed by written notice. This Agreement may be translated into any other language, provided however, that in the event of any discrepancy, inconsistency, or conflict between the English text and the text in any other language, the English text shall prevail.

32. Severability. Each provision of this Agreement is severable from the other. In the event that any such provision is declared by a court of competent jurisdiction to be unenforceable, the validity of the remainder of the Agreement shall not be affected. Headings in this Agreement are for the purpose of convenience only and shall not be used in the interpretation of any part of this Agreement. In this Agreement, the use of the singular includes the plural and vice versa and the use of any one gender includes all genders.

33. Ethics. StandardAero follows its own Ethics Code of Conduct. In the event Customer has its own code of conduct, it is Customer’s responsibility to review and verify that StandardAero’s code is aligned with the principles of Customer’s code. In no event shall StandardAero be governed by or subject to Customer’s code of conduct.  Customer acknowledges and confirms that all amounts paid or related to this Agreement shall be for actual Services rendered. Under no circumstances shall either Party, its employees, agents, or other person operating, accept, offer, promise, give, or agree to give any money, gift, loan, or other benefit or advantage, either directly or through intermediaries, to a public official, (or private person in the case of the U.K. Bribery Act), for that official, private person or third party, to exert influence, act or refrain from acting in relation to the performance of official duties, in order to obtain or retain business or other improper advantage under this Agreement.

As used herein, “Public Official” or “Government Official” includes, without limitation, (a) any official, employee, or agent of, or one who is in any manner connected with, any government or government entity, including any department, agency, instrumentality of any government, government-owned entity, or government-controlled entity, or any person acting in an official capacity thereof; (b) any candidate for political office, any political party or any official of a political party; (c) any director, officer, or employee of a public international organization (e.g., the United Nations, the World Bank, or the International Monetary Fund); or (d) any member of a royal or ruling family.

Customer represents and warrants to StandardAero that it will comply with all laws of the country(ies)/territory(ies) where Customer operates which are applicable to the performance under this Agreement, including without limitation, the U.S. Foreign Corrupt Practices Act (“FCPA”), the U.K. Bribery Act (“U.K. Act”), the Corruption of Public Officials Act of Canada (“CFPOA”) and the Organization for Economic Co-Operation & Development (“OECD”) Convention on Combating Bribery of Foreign Officials in International Business Transactions (collectively “Ethics Legislation”).

Nothing contained herein will require StandardAero to make any payment directly or indirectly under this Agreement, which in StandardAero’s good faith determination violates or is inconsistent with the Ethics Legislation.

Unless otherwise approved in advance by StandardAero, the Parties represent and warrant that no agent, finder, or commercial intermediary was instrumental in arranging or bringing about this transaction and that there are no claims or rights for commissions, fees or other compensation by any person or entity claiming by, through or in connection with this transaction.

StandardAero prohibits the use of any indentured or forced labor, slavery, or servitude, and must comply with all relevant laws regarding the prevention of human trafficking and slave labor, including the U.S. Federal Acquisition requirements, and the California Transparency in Supply Chains Act of 2010, and any other relevant law such as the UK Modern Slavery Act.

34. Privacy and Data Protection.  For the sake of clarity, the Parties are “independent controllers” or “business” and without joint-controllership as defined and within the meaning of applicable data privacy laws. Exchange of employee, agent, and contingent worker’s business-related personal data from either Party as part of execution and performance of this Agreement shall be processed and protected in accordance with the confidentiality requirements contained herein and in compliance with applicable data privacy and protection law(s). The receiving Party agrees that it shall safeguard any such personal data to prevent loss, theft or unapproved processing and shall not use the data for any other purpose except what is necessary for the stated purposes of the Agreement and privacy notices.  In the event the receiving Party learns that personal data subject to the Agreement is misappropriated, used, processed, or otherwise accessed by unauthorized parties, the receiving Party shall immediately take remediation actions and notify the disclosing Party within the timeframe required by the data protection and privacy laws and regulations of the jurisdictions of those whose data was compromised or the applicable data processing agreement, whichever is earliest. Each Party shall provide commercially reasonable assistance and cooperation supporting the other Party’s compliance obligations.

  • (a) Additional Processing. If performance under this Agreement or subsequent contracts, requires the processing of personal data in addition to the personal data identified above, the Parties agree to separately enter into a data processing agreement to ensure that processing and protection of personal data complies with relevant data protection and privacy laws and regulations.
  • (b) Transfer to or from EEA, UK, and Switzerland. If the Parties transfer personal data from the European Economic Area (EEA), UK, Switzerland or any other jurisdiction that restricts the cross-border transfer of personal data or requires a data transfer mechanism for data transfers to locations outside of that jurisdiction and no European Commission adequacy decision or derogations for specific situations apply, each Party agrees to be bound by the terms of the Standard Contractual Clauses for the transfer of personal data to third countries pursuant to Regulation (EU) 2016/679 (including the provisions in Module 1) and the UK’s International Data Transfer Addendum to the EU Commission Standard Contractual Clauses made under s119A(i) of the UK’s Data Protection Act 2018 (“Controller SCCs”) in its capacity as “data exporter” or “data importer,” as applicable, and as those terms are defined therein and published at https://eur-lex.europa.eu/eli/dec_impl/2021/914/oj. The Parties agree that the signature block set forth in the Agreement between StandardAero and Customer is hereby incorporated by reference into this Section 34(b) and the applicable SCCs. The execution of this Agreement with this Section 34(b) by authorized representatives of the Parties in the aforementioned signature block shall constitute their agreement to the terms and conditions of this Section 34 contained herein, as well as their reaffirmation of the terms of the Agreement. For jurisdictions outside of the EEA, all references to “GDPR” in the Controller SCCs will be deemed to refer to the applicable data privacy law. The Controller SCCs are hereby incorporated by reference into this Agreement in their entirety.. If there is a conflict between this Agreement and the SCCs, the SCCs will prevail. Where there is a change in the law that requires that the Controller SCCs be amended or replaced, such legally required changes will be deemed to have been made automatically without further action by the Parties.

The Parties acknowledge that the information required to be provided in the appendices are provided below:

Data Exporter / Importer / Controller Data Importer / Exporter / Controller
Name: StandardAero and its Affiliates The other Party or Customer, as set forth in the Agreement, DPA, and/or applicable Order with respect to the Services performed by StandardAero.
Address: 6710 N. Scottsdale Rd., Ste 250
Scottsdale, Arizona 85253 USA
Individual Responsible for Personal Data Privacy and Protection
Name: Stephanie Buholz The other Party or Customer, as set forth in the Agreement and/or applicable Order with respect to the Services performed by StandardAero.
Position: Sr. Director, Global Privacy
Email: [email protected]
Data Protection or Privacy Officer
(if applicable):
N/A
Representative in the EU (if applicable): N/A
Activities, nature and purposes relevant to the data transferred under these Clauses: The provision of the Services by the data importer to the data exporter.
Description of the Ongoing Transfer
Categories of Data: Business Contact Information and other personal data necessary for contract execution and servicing such as company employment, work location, IP address, etc.
Data Subject Category Employees, agents and contingent and service workers of either Party
Period for which personal data will be retained: The duration of the Agreement or upon the request of the exporter.


35. Artificial Intelligence. Artificial Intelligence (“AI”) means any technology that can make decisions, create predictions, generate content or recognize patterns, including without limitation generative artificial intelligence, large language models, and machine learning models, systems and algorithms, and automated decision-making workflows. Neither Party shall use, deploy, or develop any AI tools to input, use, analyze, generate, or otherwise process content using the other Party’s Confidential Information unless the following conditions are met: (i) the AI tools are private or closed and are hosted or deployed within IT infrastructure the Party (or your service provider(s)) control; (ii) the AI tools are configured so that no Confidential Information is learned, reused by, or produced as output of the AI system to a third party and is only retained or stored as necessary for regulatory compliance requirements (such as output validation); (iii) appropriate technical, organizational, and contractual safeguards are in place to protect the Confidential Information; (iv) the AI tools do not combine the other Party’s Confidential Information with other data or use the Confidential Information or derivative (including anonymized Confidential Information) thereof for any of its own or third-party purposes (e.g., to fine-tune, train, or improve the AI tool or as part of a large language model or data lake); and (v) such use complies with applicable AI, privacy and data protection laws and regulations. Each Party agrees to promptly provide requested information regarding its use of AI tools upon the other Party’s request.

36. Employee Solicitation. Unless otherwise agreed to by the Parties in writing, during the term of this Agreement and for six (6) months thereafter, neither Party will, directly or indirectly, solicit for employment, offer employment to or employ or retain, whether as an employee, officer, agent, consultant, advisor or in any other capacity, any employee of the other Party who is or was actively involved in the provision of the Services under this Agreement. This restriction does not apply when the employee obtains information regarding the subsequent position through the public domain or independently without the hiring Party’s direct solicitation.

37. Conflicting Provisions. In the event of a conflict between these Terms and Conditions and any additional terms in StandardAero’s Proposal or in the Estimate, these terms and conditions govern unless expressly stated otherwise. StandardAero expressly objects to and rejects any inconsistent or additional terms included in Customer’s purchase order, repair order, or any other document Customer provides to StandardAero unless agreed to in writing. For certainty, the provisions in this Agreement govern if there is any conflict between this Agreement and Customer purchase order, or any other document, containing inconsistent or additional terms.

38. Entire Agreement. This Agreement and its appendices shall operate for the benefit of and shall constitute the sole Agreement between the Parties and their respective successors and permitted assigns with regard to the subject matter herein and supersedes all other contracts, agreements or understandings, whether oral or written, of the matters herein, subject only to any written amendments consented to by both Parties, which specifically reference this Agreement. This Agreement or any modification may be executed by facsimile, electronic signature, or a signed, scanned document, and each facsimile, electronic, or scanned signature will be deemed to constitute a valid binding signature of the executing Party. Any fully executed copy bearing facsimile or scanned signatures will be deemed an original.

39. Counterparts. This Agreement may be executed in any number of counterparts, each of which shall be deemed to be an original, and all of which shall constitute together but one and the same document.

40. Cybersecurity, Environmental, and Social Governance Compliance. StandardAero acknowledges that there are various initiatives both domestically and internationally with respect to general compliance issues, including but not limited to cybersecurity, environmental, ethics, and social governance issues. StandardAero maintains its own compliance efforts related to these topics. Information can be found at StandardAero’s Corporate Sustainability Page located at https://standardaero.com/aboutus/corporatesustainability.

41. Independent Evaluation. If an independent evaluation is requested by Customer, StandardAero shall provide information pertaining to its third-party assessment issued by a provider selected at StandardAero’s sole discretion. In no event shall StandardAero provide responses to customized or Customer specific questionnaires or surveys whether issued by Customer’s Supply Chain organization or other means.

Legal Notices to be sent to:

StandardAero
Legal Department
6710 N. Scottsdale Rd., Ste 250
Scottsdale, Arizona 85253